GONLEN Wireless Home Alarm System Strobe Solar Siren Burglar Anti Theft with Door Sensor PIR Motion Detection for Security Protection

Price: $59.99
(as of Jan 29, 2024 13:48:02 UTC – Details)

Product Description

1. Solar powered strobe siren, IP65 waterproof level, Outdoor usage.

2. Built in 433mhz receiver, can support to link with all kinds of 433mhz wireless sensors, such as door sensors, PIR motion sensors, remote controllers and other 433mhz detectors.

3. Support 20 wireless sensors and 5 remote controllers max.

Packing List

1 solar siren

3 door window sensors

2 PIR motion sensors

2 remote controllers

Note: The door window sensors and PIR motion sensors are not waterproof design, can’t install outdoor.

How to work?

Scare away intruders by loud alarm sound (about 105 to 115db) and dazzling strobe when sensors are triggered. When burglars open the door or window installed with door window sensors or walk through the detection area of PIR motion sensors, these sensors will be triggered to transmit the 433mhz alarm signal to the solar siren immediately, then solar siren response the alarm quickly with loud sound and dazzling strobe. Users can use remote controller to arm/disarm the alarm system

Wide application

Widely used for villas, communities, shops, factories, schools, banks etc.,

Specification of solar siren

1. External power supply voltage: DC9V to 12V

2. Solar panel output voltage: 5.0V

3. Standby current < 1mA

4. Alarm current < 150mA

5. Alarm sound level > 100DB, about 105 to 115db.

6. Receiver frequency: 433mhz

7. Coding: EV1527 / PT2262

8. Backup battery: 3.7V 1000mA battery.

9. Working temperature: -20℃- 55℃ ( -4℉- 131℉)

10. Size: 164.3mm x 124.3mm x 59mm (6.47in x 4.89in x 2.32in)

Mini Door Window Magnetic Sensor

Door window sensor is consisted of transmitter and magnet two parts. It can be installed on doors,windows or any object that can be closed and opened. When transmitter is separated from the magnet, door sensor will send alarm signal to the outdoor solar siren that will trigger an alarming.

HOW TO INSTALL: Mounted the door sensor on the doors or windows by the double-sides adhesive or small screws. Note: A. There is a small Allow sign on the one side of transmitter and magnetic. Please make sure the two Arrows sign must be aligned together during installation. B: The gap between transmitter and magnet should not more than 1cm (0.39 inch)

Specificaion:

Size: Transmitter: L:6cm * W:2.4cm * H:1.2cm ( L:2.36 * W:0.94 * H:0.47 Inch)

Magnetic Part: L:4cm * W:1.0cm * H:1.2cm ( L:1.57 * W:0.39 * H:0.47 Inch)

Wireless frequency: 433mhz

Chip Cod Form: EV1527 with 330K resistor

Transmission Distance: About 20M to 40M indoor;100m in open area (no obstacle)

About 65ft to 130ft indoor; 320ft in open area (no obstacle)

PIR motion sensor

PIR refers to passive Infrared sensors. A Passive Infrared sensor is an electronic device that detects the motion or movement of human body by sensing the heat emitted from the body. When thieves walk through the detection area, PIR detector is activated to send wireless signal to solar strobe siren, then siren make alarming after receive the signal.

HOW TO INSTALL: Infrared motion sensor should be installed on the wall around 2.2 meters over the ground and be aligned to detecting regions. Adjust the direction and distance to the suitable position and then fix the sensor on the wall. PIR can only be installed in the room/hall, not face the sunlight and windy.

Tips: After power on the PIR sensor, it starts self-warming up with indicator flashing per second for 30 to 50s, and then PIR enter into normal working status. Please test the PIR after it finishes warming-up.

Specification:

Wireless Frequency: 433 MHZ

Chip code:1527

Timing resistor:330k

Transmission Distance: About 20M to 50M indoor;110m in open area (no obstacle)

About 65ft to 160ft indoor; 360ft in open area (no obstacle)

Detective Range: Horizontal 110°, Vertical 45° to 60°

Detection Distance: About 6M to 10M, (about 19ft to 30ft )

Installation Height: 1.8M to 2.5m (2.2m is recommended)

about 5.9ft to 8.2ft (7.2ft recommended)

Size:L:10CM * W:4CM * H:2.4CM ( L:3.94 * W:1.57 * H:0.94 Inch)

Solar powered strobe siren: IP65 waterproof, designed for outdoor use.
Built in 433mhz receiver, can support to link with all types of 433mhz wireless sensors, such as door sensor, PIR motion sensor, remote controllers and other 433mhz detectors.
Scare away intruders by loud alarm sound (about 105 to 115db) and dazzling strobe when sensors are triggered. When burglars open the door or window installed with door window sensors or walk through the detection area of PIR motion sensors, these sensors will be triggered to transmit the 433mhz alarm signal to the solar siren immediately, then solar siren response the alarm quickly with loud sound and dazzling strobe. Users can use remote controller to arm/disarm the alarm system.
Open the back cover, users can set different alarm tones and alarm siren duration by adjusting jumper. Usually factory help adjust it to be the best setting as default before shipment, suggest not to change it if you don’t know how to adjust jumper.